United States December 16, 2002
Maintenance & Service Guide
Presario 5600 Series Personal Computers
MSG Index | Home | Preface | Product Description | Troubleshooting | Illustrated Parts | Removal & Replacement
Jumpers & Switches | Specifications | Connector Pins | Power Cord Requirements
Removal and Replacement
Memory Module
Disassembly
Sequence
Hood
Front Bezel
Card Guides
Fan
USB Cables
Creativity Center
Mass Storage Devices
Memory
Option Card Retainer
Graphics Board
Fax/Modem
Serial Port
Homenet Daughter Board
Processor
Processor Goal Posts
System Board Cables
System Board
RTC Battery
I/O Panel
Power Supply
Removal
1. Perform the
preparation for disassembly
procedure.
2.
Remove the hood.
3. Press outward on the release latches
found on both ends of the dual inline
memory module (DIMM).
4. Detach memory module from slot. End
of sequence.
Replacement
To replace memory module, reverse the
removal procedure.
privacy statement and legal notices
To Next Page
Loading...
