Compaq Presario 5600 Series - System Board

United States December 16, 2002
Maintenance & Service Guide
Presario 5600 Series Personal Computers
Home | Preface | Product Description | Troubleshooting | Illustrated Parts | Removal & Replacement
Jumpers & Switches | Specifications | Connector Pins | Power Cord Requirements
Removal and Replacement
System Board
Dissasembly Sequence
Hood
Front Bezel
Card Guides
Fan
USB Cables
Creativity Center
Mass Storage Devices
Memory
Option Card Retainer
Graphics Board
Fax/Modem
Serial Port
Homenet Daughter Board
Processor
Processor Goal Posts
System Board Cables
System Board
RTC Battery
I/O Panel
Power Supply
Removal
1.
Perform
the
preparation for
disassembly
procedures.
2.
Remove the
hood.
3.
Remove the
fan.
4.
Remove the
video board.
5.
Remove the
serial port.
6.
Remove the
processor.
7.
Remove the
processor goal
posts.
8.
Disconnect the
system board
cables.
9.
Remove
nine
screws
from the
system
board.
10.
Slide
system
board
forward
and lift
from the
computer.
Replacement
To replace
the system
board,
reverse
the
removal
procedure.
NOTE:
Be sure to
remove
components
such as
DIMMs,
processor,
and video
memory
before
replacing
the System
Board.
privacy statement and legal notices