United States December 16, 2002
Maintenance & Service Guide
Presario 5600 Series Personal Computers
MSG Index | Home | Preface | Product Description | Troubleshooting | Illustrated Parts | Removal & Replacement
Jumpers & Switches | Specifications | Connector Pins | Power Cord Requirements
Removal and Replacement
I/O Panel
Disassembly
Sequence
Hood
Front Bezel
Card Guides
Fan
USB Cables
Creativity Center
Mass Storage Devices
Memory
Option Card Retainer
Graphics Board
Fax/Modem
Serial Port
Homenet Daughter Board
Processor
Processor Goal Posts
System Board Cables
System Board
RTC Battery
I/O Panel
Power Supply
Removal
1. Perform the
preparation for disassembly
procedures.
2. Remove the hood.
3. Remove the fan.
4. Remove graphics board.
5.
Remove the fax modem.
6. Remove serial port.
7. Remove processor.
8. Remove processor goal posts.
9. Remove the system board.
10.Gently push the I/O panel into
the chassis from the ear of the
chassis and remove. End of
sequence.
Replacement
To replace the I/O panel,
reverse the removal procedure.
privacy statement and legal notices
To Next Page
Loading...
