Compaq Presario 5700 Series - Page 113

United States
STORE | PRODUCTS | SERVICES | SUPPORT | CONTACT US | SEARCH
Maintenance & Service Guide
Presario 5700 Series Personal Computers
Models: 5710, 5711, 5712, 5714, 5715, 5716, 5717, 5718, 5721,
5722, 5724, 5726, 5728, 5733, 5735, 5736, 5738, 5745 and 5746
MSG Index | Home | Preface | Product Description | Troubleshooting | Illustrated Parts |
Removal & Replacement | Jumpers & Switches | Specifications | Connector Pins
Removal and Replacement
Power Supply
Disassembly Sequence
Chassis
Mass Storage Devices
Button Board
Front I/O Cable
Creativity Action Center
Fan
Option Card Retainer
Graphics Board
Fax/Modem
Networking Interface Card
Memory
Processor
Removal
1. Perform the preparation for
disassembly procedures.
2. Remove the Chassis.
3. Remove 5.25" or 3.5" Hard Drive.
4. Disconnect System Board Cables.
5. Disconnect power supply cables from CD/DVD, Zip drive,
Diskette and Hard Drive.
6. Remove Graphics Board (on select models only).
7. Remove the Fax/Modem.
8. Remove Networking Interface Card (on select models
only).
9. Remove Memory.
10. Remove Processor.
11. Remove the System Board.
12. Remove four screws from the back of the unit
and one screw from the tab.
13. Slide the Power Supply toward front of unit and down to
remove from chassis.
Compaq.com - Compaq Presario Maintenance and Service Guide - 5700 Series
http://www.compaq.com/athome/support/msgs/5700/pwrsply.html (1 of 2) [1/10/2002 11:55:53 AM]