2411-xx Video screen memory page test
failed
2412-xx Video gray scale test failed
2414-xx Video white screen test failed
2416-xx Video noise pattern test failed The following steps apply to error codes
2402-xx through 2456-xx:
2418-xx ECG/VGC memory test failed 1. Run Setup.
2419-xx ECG/VGC ROM checksum test
failed
2. Replace the system board and retest.
2420-xx ECG/VGC attribute test failed
2421-xx ECG/VGC 640 × 200 images
mode test failed
2422-xx ECG/VGC 640 × 350 16-color
set test failed
2423-xx ECG/VGC 640 × 350 64-color
set test failed
2424-xx ECG/VGC monochrome text
mode test failed
2425-xx 640 × 480 images test failure
2431-xx 640 × 480 images test failure
2432-xx 320 × 200 images (256-color
mode) test failed
2448-xx Advanced VGA Controller test
failed
2451-xx 132-column Advance VGA test
failed
2456-xx Advanced VGA 256-Color test
failed
2468-xx Advanced VGA BitBLT test The following steps apply to error codes
2468-xx through 2480-xx:
2477-xx Advanced VGA datapath test 1. Run Setup.
2478-xx Advanced VGA BitBLT test 2. Replace the system board and retest.
2480-xx Advanced VGA Linedraw test
http://www.compaq.com/athome/support/msgs/5700/diagec2.html (6 of 7) [1/10/2002 11:56:02 AM]
To Next Page
Loading...
