Compaq Presario 5700 Series - Page 94

United States
STORE | PRODUCTS | SERVICES | SUPPORT | CONTACT US | SEARCH
Maintenance & Service Guide
Presario 5700 Series Personal Computers
Models: 5710, 5711, 5712, 5714, 5715, 5716, 5717, 5718, 5721,
5722, 5724, 5726, 5728, 5733, 5735, 5736, 5738, 5745 and 5746
MSG Index | Home | Preface | Product Description | Troubleshooting | Illustrated Parts |
Removal & Replacement | Jumpers & Switches | Specifications | Connector Pins
Removal and Replacement
Networking Interface Card
Disassembly Sequence
Chassis
Mass Storage Devices
Button Board
Front I/O Cable
Creativity Action Center
Fan
Option Card Retainer
Graphics Board
Fax/Modem
Networking Interface Card
Memory
Processor
Removal
1.
Perform the preparation for disassembly
procedures.
2.
Remove the Chassis.
3. Remove the Option Card Retainer.
4. Pull the Networking Interface Card and
bracket out and to the right to remove
from chassis.
Replacement
To replace the Networking Interface
Card, reverse the removal procedure.
Compaq.com - Compaq Presario Maintenance and Service Guide - 5700 Series
http://www.compaq.com/athome/support/msgs/5700/tut.html (1 of 2) [1/10/2002 11:55:46 AM]