EasyManua.ls Logo

Compaq Presario 7400 Series - Troubleshooting Without Diagnostics

Compaq Presario 7400 Series
196 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
United States
Maintenance and Service Guide
Compaq Presario 7400 Series Computers
MSG index Product Description Troubleshooting Illustrated Parts Catalog
Home Removal & Replacement Jumper & Switch Information Specifications
Troubleshooting
Clearing CMOS
Power-On Self Test
(POST)
Configuration
Diagnostics Software
Troubleshooting
without diagnostics
TROUBLESHOOTING
Troubleshooting Without Diagnostics
This section describes some simple, preliminary tests and guidelines for troubleshooting the
computer.
Checklist For Solving Minor Problems
If you encounter some minor problem with the computer or with a software application,
go through the following checklist for possible solutions before running any of the diagnostic
utilities:
Is the computer connected to a working power outlet?
Is the computer turned on and the power light illuminated?
Are all cables connected properly and seated?
Are all of the necessary device drivers installed?
Is the CONFIG.SYS file correct?
Is the AUTOEXEC.BAT file (MS-DOS) or STARTUP.CMD file correct?
Was a nonbootable diskette loaded in the diskette drive at power-up?
Are all switch settings correct?
Was Computer Setup run after installing the options (memory, disk drives, etc.)
and before installing the industry standard architecture boards?
Quick checks and possible solutions for problems related to these topics:
CD drive hard drive VGA monitor
diskette drive hardware installation
Compaq.com - Compaq Presario Maintenance and Service Guide - 7400 Series
http://www.compaq.com/athome/support/msgs/7400/trbnod1.html (1 of 6) [1/8/2002 3:52:59 PM]

Related product manuals