Compaq Presario 7400 Series - Flat-Panel Monitor

DVD drive power
flat-panel monitor (on
select models only)
USB ports
are provided in the tables below. The procedure for resolving hardware conflicts is also described.
Flat-panel monitor
Problem Probable cause(s) Possible solution
Screen is
blank.
Your computer may
not support flat-panel
monitors.
See your authorized dealer or reseller about CPU
support for the Digital Video Interface (DVI) needed.
Cannot find
the video
connector on
back of the
CPU for a
flat-panel
monitor.
Your computer may
not have a digital
flat-panel port (DFPP).
See your authorized dealer or reseller about CPU
support for flat-panel monitors.
The display
only fills part
of the screen.
The monitor does not
support your
resolution setting.
FP400 and FP500 Series flat-panel monitors only
support the 1024 x 768 resolution mode. To change
your resolution setting in the Display dialog box:
1
Click on Start.
2
Point at Settings and click on Control Panel.
3
Double-click on Display.
4
Click on the Setting tab, and move the sliding
pointer to give 1024 x 768 pixel resolution.
Compaq.com - Compaq Presario Maintenance and Service Guide - 7400 Series
http://www.compaq.com/athome/support/msgs/7400/trbnod1.html (2 of 6) [1/8/2002 3:52:59 PM]