Compaq Presario 7400 Series - Page 159

Diskette
drive light
stays on.
Diskette may be damaged. From the desktop click on the
Start menu. Choose Program
Accessories System
Tools
Scandisk to check
for problems.
Diskette may be installed
incorrectly.
Remove the diskette and
reinsert.
Software program may be
damaged.
Check the program diskettes.
Diskette
drive cannot
write to a
diskette.
Diskette is not formatted. Format the diskette.
Diskette is write-protected. Either use another diskette
that is not write-protected or
disable the write protection on
the diskette.
Writing to the wrong drive. Check the drive letter in your
path statement.
Not enough space is left on the
diskette.
Use another diskette to write
the information.
Diskette
drive cannot
read a
diskette.
Diskette is not formatted. Format the diskette.
Using the wrong diskette type
for the drive type.
Use a diskette that is
compatible with the drive.
Reading the wrong drive. Check the drive letter in your
path statement.
Diskette drive has been
disabled by Computer Setup.
Run Computer Setup and
enable the diskette drive.
Compaq.com - Compaq Presario Maintenance and Service Guide - 7400 Series
http://www.compaq.com/athome/support/msgs/7400/trbnodg.html (5 of 8) [1/8/2002 3:53:00 PM]