12. Remove the display panel (2) from the display enclosure. The display panel is available using spare
part number 462318-001.
13. Remove the eight Phillips PM2.0×4.0 screws (1) that secure the hinges to the display panel.
14. Remove the display hinges (2) from the display panel. The display hinges are available using spare
part number 462392-001.
15. If it is necessary to replace the wireless antenna transceivers and cables, release the tabs (1) built
into the display enclosure that secure the wireless antenna cables.
Component replacement procedures 53
Downloaded from LpManual.com Manuals
To Next Page
Loading...
