EasyManua.ls Logo

Compaq Presario V3000 - Notebook PC - Factory Power Settings; Turning Computer or Display On;Off; Emergency Shutdown Procedures

Compaq Presario V3000 - Notebook PC
38 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4 Factory power settings
This section explains the factory standby, hibernation, and shutdown procedures.
Turning the computer or display on or off
Task Procedure Result
Turn on the computer. Press the power button.
The power lights are turned on.
The operating system loads.
Shut down the computer.* 1. Save your work and close all open
applications.
2. Shut down the computer through the
operating system by selecting Start > Turn
Off Computer > Turn Off.*
The power lights are turned off.
The operating system shuts
down.
The computer is turned off.
Turn off the display while the
power is on.
Close the computer. Closing the computer activates the
display switch, which initiates standby.
*If you have been registered to a network domain, the button you click will be called Shut Down instead of Turn Off
Computer.
Using emergency shutdown procedures
CAUTION Emergency shutdown procedures result in the loss of unsaved information.
If the computer is unresponsive and you are unable to use normal Windows shutdown procedures, try
the following emergency procedures in the sequence provided:
Press ctrl+alt+delete. Then, select Shut Down > Turn Off.
Press and hold the power button for at least 5 seconds.
Disconnect the computer from external power and remove the battery.
ENWW Turning the computer or display on or off 9