17. Remove the inverter (2) from the bracket.
18.
If it is necessary to replace the display hinges, remove the two black Phillips PM2.5×5.0 screws
(1) that secure each hinge to the display enclosure.
19. Remove the display hinges (2) from the display enclosure. The display hinges are available using
spare part number 417103-001 for computers with Intel processors, 455822-001 for computers
with AMD processors.
20.
If it is necessary to replace the display switch module, remove the black Phillips PM2.5×5.0
screw (1) that secures the display switch module to the display enclosure.
Component replacement procedures 75
To Next Page
Loading...
