Removal and Replacement Procedures
Maintenance and Service Guide 5–41
24. If it is necessary to replace the microphones and cables,
release the retention tabs 1 built into the display enclosure
that secure the microphones and cables to the
display enclosure.
25. Remove the microphones 2 from the clips in the
display enclosure.
26. Remove the microphone cables 3 from the display enclosure.
Removing the Microphones
Reverse the above procedure to reassemble and install the
display assembly
Display Assembly Subcomponents
Spare Part Number Information
Microphone Kit (includes microphone receivers and cables) 431393-001
To Next Page
Loading...
