G1000i Inverter Generator
24
send it to the local repair station or recycle center. Do not pour the oil to the
ground or into the rubbish.
3. Maintenance of the air filter
Dirty air filter will block the air from entering the carburetor. In order to prevent
the carburetor from failure, please maintain the air filter regularly. If the generator
is used in very dirty places, it will thus need to be maintained more regularly.
Warning
Do not use gasoline or solvent with low burning point to clean the engine, as
they are easy to burn and explode under specific conditions.
Look out
Do not run the generator without the air filter, or else the engine will be worn
quickly.
1. Loosen the screw on the repair cover, and dismantle the repair cover.
2. Loosen the screw on the cover of the air filter, and then dismantle the cover of
the air filter.
3. Clean the core of the air filter with the kind of solvent which is not flammable
or has high burning point, and then air the core.
4. Clean the core with clean machine oil, and squeeze out superfluous machine
oil.
5. Re-install the core of air filter and its cover, and screw the screw on the cover.
6. Re-install the repair cover, screw the screw.
To Next Page
Loading...