Component Playgrounds PH45 - Accessory Installation Guides; Climber Add-On Installation

FirePoleor
Tree Climber
Barrier
3/8” x 2”
Bolt&Nut
2SetsofPanel
Clamps
INSTALLATION INSTRUCTIONS
CH/PHFirePole,TreeClimber,Wild
ClimberorTriangleClimberAddOn
©2009 Swings & Things Inc.
(Approximately
1 80 lb. bag of
concrete mix)
• Position the Fire Pole or Climber in the center of the opening of the CH or
PH Barrier.
• Determine location of hole and dig hole as shown below.
• Panel Clamp the Fire Pole or Climber to Barrier making sure the pole is
level.
• Cement in ground.
CH/PH
FirePole
Tree
Climber
Wild
Climber
Triangle
Climber