EasyManua.ls Logo

Comprag F Series - Compressor Storage and Disposal; Recommended Storage Conditions; Fluid and Component Disposal

Comprag F Series
108 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
37COMPRAG Schraubenkompressoren F-Serie
7. Storage and disposal
7.1 Storage conditions
The compressor should be kept at a temperature between -20° and +35°С with max. 85%
relative humidity.
7.2. Disposal of oils and process condensate.
Used oils, greasy lters and separators should be recycled in a sealed container and dis-
posed of at a local recycling or disposal facility. Do not allow precipitation to mix with oil.
Process condensate contains oil. Local environmental regulations govern the degree of con-
tamination of condensate discharge into sewers. Use process condensate separators to se-
parate oil and further impurities from condensate.
Replaceable components of a process condensate separator should be disposed of in the
same way as greasy wiping cloths.

Related product manuals