37
VECTOR
STARTING A NEW SHOW AND PATCHING
2. Press DIM.
3. Press
2 (the port) / (slash) 24 (dimmer) or use the direct dimmer
number, in this example, 536.
4. Press
ENTER. The command line shows Assigned when the operation is
successful.
To patch external dimmers
Example: Channel 8, patched to DMX channel 8, is a fixture with a
scroller. Patch the external dimmer number, for the scroller, to DMX
channel 108.
1. Press
DIM and select the dimmer number, 108.
2. Ta p
EXTERNAL PARAMETER.
3. Select fixture channel 8.
4. Press
ENTER.
To Next Page
Loading...