Compulite Vector Violet - Page 77

71
VECTOR
PROGRAMMING AND UPDATING CUES
To store cues to the master playback device
Example: Store a cue to the default QList (the QList loaded to the
master playback).
1. Select fixtures and set values.
2. Press
ENTER.
The values are output.
3. Press
STORE.
4. Press
CUE and enter a cue number on the numeric keypad.
5. Press
ENTER.
The cue is automatically added to the QList on the master playback.
OR
1. Select fixtures and assign values.
2. Press
ENTER.
The values are output.
3. Press
STORE +.
The editor is stored to the next available cue number. It is displayed
in the command line with the QList number for the cue on the
master playback.
To add cues to the QList on the master playback device
Example: Store a new cue to the default QList (the QList loaded to the
master playback).
1. Select fixtures and set values.
2. Press
ENTER.
The values are output.
3. Press
STORE +.
The editor is stored to the next available cue number. It is displayed
in the command line with the QList number for the cue on the
master playback.
OR
1. Select fixtures and set values.
Continued on next page...