80
Compulite
Chapter 4
Using the Update dialog box options:
Option What it does
GRAB ALL New values can be stored to cues currently output
from playback devices, on the condition that the cues
are selected in the Cue column.
NEW TO MASTER
PB
New values are stored in the cue output from the
master playback. This is the default.
MASTER PB
ONLY
Updates the cue on the master playback only.
UPDATE ALL
LIBS
Updates all libraries where appropriate. The relevant
libraries are displayed in the library column.
COPY NEW
DELTA
Copy the values active in the editor to the clipboard
and use as a delta..
CUE ONLY
(Tracking mode)
The updated value(s) are for the current cue only.
When fading to the next cue the updated values
return to the tracked value.
BACK TRACK
(Tracking mode)
Change the value(s) in all the previous cues.
To update cues using back track
Example: Channel 1 is tracking through the cues at
70%. Update cue 5 for channel 1 at 35% and update
the previous cues (cues 1 - 4) with same value.
1. Select channel 1 and set the intensity to 35%.
2. Press UPDATE. The update items dialog box opens.
3. Ta p B A CK T R A C K .
4. Tap OK. The value for channel 1 is updated in cues
1 - 5.
SAVE AS
DEFAULT
By using this option you are guaranteed that the Item
selected from the Update Items box remains saved as
the Default.
FACTORY
DEFAULTS
The Factory Defaults button returns the options in the
Update Items dialog box to their factory Default value
which is New to Master PB and Update All Libs options
selected.
To Next Page
Loading...