0 n 13
Function
Selects the set of characters printed for specific character codes, as listed below:
n = 0 USA
1 France
2 Germany
3 United Kingdom
4 Denmark I
5 Sweden
6 Italy
7 Spain I
8 Japan (English)
9 Norway
10 Denmark II
11 Spain II
12 Latin America
ESC % Select user-defined set
Format
ASCII ESC % n
Hex 1B 25 n
Decimal 27 37 n
Parameter range
n = 0, 1
Function
Switches between normal and user-defined characters, as follows:
n = 0 Normal (ROM) characters
1 User-defined (RAM) characters
ESC x Select LQ or draft
Format
ASCII ESC x n
Hex 1B 78 n
Decimal 27 120 n
Parameter range
n = 0, 1
Function
Selects either LQ or draft printing according to the following values:
n = 0 Draft printing
1 Letter-quality printing
ESC M Select 12-cpi
Format
ASCII ESC M
To Next Page
Loading...
