ComXim MT Series - Page 3

MT series remote control intelligent turntable user guide
Copyright reserved by Shenzhen ComXim Technology Co., Ltd. 2017
2
Table 2
Letter
Meaning
Functions
Application
A
A=AC alternating
current
AC motor turntable
With a AC motor， rotate by random direction while power on，Some models can
support control direction
K
K=Knob
Speed adjusted by knob
Adjust the speed of turntable by knob
R
R= Remote
Support controlled by
remote controller
Use remote controller to control the speed, direction angle and rotation mode
of the turntable
U
B= USB Interface
Support connected and
controlled via USB
The turntable could be connected with computer via USB cable, and controlled
with computer software(speed, direction, angle, pause time, rotation mode);
support secondary development with USB interface
C
C= COM Interface
（RS232）
Support connected and
controlled via serial port
(RS232)
The turntable could be connected with computer via serial port (RS232),and
controlled with computer software(speed, direction, angle, pause time, rotation
mode); support secondary development with USB interface
B
B= Bluetooth
Support connected and
controlled via Bluetooth
The turntable could be connected and controlled with smart phone or computer
via Bluetooth, and controlled with App or software(speed, direction, angle,
pause time, rotation mode); support Bluetooth secondary development
W
W= WIFI
Support connected and
controlled via WIFI
The turntable could be connected and controlled with smart phone or computer
viaWIFI, and controlled with App or software(speed, direction, angle, pause
time, rotation mode); WIFI Supports secondary development ,the turntable WIFI
is AP mode, WIFI direct connect and control
S
S= Shutter
Support synchronized
shutter
Support synchronized shutter, the turntable output shutter signal during
intermittent rotation，Intermittent angle and pause time could be set up by
software or APP, also supports secondary development