To Next PageTo Next Page
Need help?Do you have a question about the Conair W1-1.5 and is the answer not in the manual?
General| Model | W1-1.5 |
|---|---|
| Brand | Conair |
| Cooling Capacity | 1.5 tons |
| Voltage | 208-230V |
| Phase | 1 |
| Water Flow Rate | 3 GPM |
Explains the process circulation and refrigerant circulation in water-cooled models.
Details the process circulation and refrigerant circulation in air-cooled models.
Provides detailed technical specifications, dimensions, and utility requirements.
Step-by-step instructions for safely uncrating and inspecting the chiller.
Critical safety warnings and precautions for chiller installation.
Guidance on selecting the location and ensuring proper site requirements.
Instructions for connecting process fluid lines and condenser water lines.
Procedures for filling the chiller with water or glycol solution.
Steps for safely connecting the chiller to the main power supply.
Step-by-step guide for powering up and initial startup procedures.
Procedures for starting, stopping, and placing the chiller into pump-down mode.
Guide to programming various parameters via the PLC control.
Instructions for adjusting the desired To Process fluid temperature.
Procedure to set the glycol percentage for low-temperature applications.
Essential safety warnings and precautions for performing maintenance.
Guidelines for daily, weekly, monthly, and semi-annual maintenance tasks.
How to check the refrigerant level via the sight glass for proper system operation.
Procedure for acknowledging alarms and understanding alarm codes and descriptions.
Troubleshooting steps for control panel issues, power, and PLC errors.
Detailed list of alarm conditions, their possible causes, and recommended solutions.
