Instructions
for use of
Weight Watchers
bathroom scale
Congratulations! By purchasing this Weight Watchers Scale, you’ve made
the first step toward taking control of your weight. To get the greatest benefit
from your purchase, please read this entire brochure before using your scale.
©2007 Conair Corporation. East Windsor, NJ 08520, Glendale, AZ 85307. Made in China.
©2007 Weight Watchers International Inc. All rights reserved. Weight Watchers is the
registered trademark of Weight Watchers International Inc. and used under license.
Service Centers
Conair Corporation
Service Department
150 Milford Road
East Windsor, NJ 08520
Conair Corporation
Service Department
7475 N. Glen Harbor Blvd.
Glendale, AZ 85307
1-800-326-6247
www.conair.com
08AD064
IB-8738
LIMITED TEN YEAR WARRANTY
Conair will repair or replace, at our option, your appliance free of charge for 120
months from the date of purchase if the appliance is defective in workmanship
or materials.
To obtain service under this warranty, return the defective product to the service
center listed below that is nearest you, together with your sales slip and $5.00 for
postage and handling. California residents need only provide proof of purchase
and should call 1-800-3-CONAIR for shipping instructions. In the absence of a
receipt, the warranty period shall be 120 months from the date of manufacture.
ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILITIES, INCLUDING BUT NOT
LIMITED TO THE IMPLIED WARRANTY OF MERCHANT ABILI TY AND FITNESS FOR
A PARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO THE 120-MONTH
DURATION OF THIS WARRANTY.
Some states do not allow limitations on how
long an implied warranty lasts, so the above limitations may not apply to you.
IN NO EVENT SHALL CONAIR BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY,
EXPRESS OR IMPLIED, WHATSOEVER.
Some states do not allow the exclusion
or limitation of special, incidental, or consequential damages, so the above
limitation may not apply to you. This warranty gives you specific legal rights,
and you may also have other rights which vary from state to state.
NOTES
If you step on the scale before “0.0” appears, the scale will not function
properly.
Scale will show “Err” if there is improper foot contact in the body analysis
mode, for instance, when you stand on the scale with socks or shoes on.
Hard or dry skin can prevent you making proper contact with electrodes on
the surface of the scale. Try applying a small amount of moisturizer to your
feet before using the scale.
4. Your current weight will be displayed for a few seconds.
5. Then the display will show your body fat percentage.
6. Next, the display shows your body water percentage.
7. Then, the display, shows your bone mass value.
8. Finally, the display shows your Body Mass Index (BMI) score.
9. Display turns off automatically.
Scales by
™
Models #WW78
Customizing Your Body Analysis Monitor
This scale can be customized for up to 4 users. While the customization process is
not diffi cult, it may be easiest to read all the instructions fi rst to familiarize yourself
with them. Then keep the instruction manual handy as you go through the process
step by step.
Buttons: USER, SET, Up and Down arrows
1. To set your user data
Tap the scale to turn it on and wait until "0.0" appears.
2. Setting the user number
Press the “Set “button. The number “P-01” will appear and blink. Use the Up/Down
button to select a user number (P-01 to P-4). Press SET to confi rm.
3. Setting the height
Next, the inch or cm symbol light up (if switch is set to lb, default is height in inches;
if switch is set to KG, default is height in cm). Press the up or down arrows to adjust
the height. Pressing and holding either the up or the down arrow will advance
numbers quickly. Press SET to accept the height. Scale enters the age setting mode.
4. Setting the age
“AGE” appears and the default age 25 fl ashes. Press the up or down arrows to
adjust the age and press SET to confi rm. The scale enters the gender setting mode.
5. Setting the gender
A gender icon fl ashes. Press the up or down arrows to choose between male and
female gender.
6. Displaying and storing data
Once gender is set, data storage is complete. Scale will display your stored data:
User number, Height and Age will each show for a few seconds.
7. The scale will turn off automatically. It is now ready for use.
Body Analysis
1. Operate the scale on a secure fl at fl oor. Tap the scale to turn it on, and wait till
“0.0” appears. Press the “User” button repeatedly until your user number shows on
the display.
2. Stored data for your user number appears (User number, Height, and Age) then
the scale displays “0.0”.
3. Step on the scale barefoot with your feet aligned on the electrodes (metal strips)
on both the sides of platform. Note: you must be barefoot in order for the scale to
read your body analysis measurements.
cm
Age
lb
kg
FAT
BONE
Age
lb
Age
cm
kg
Age
WATER
BMI
lb
kg
08AD064 WW78 IB comp.indd 1-608AD064 WW78 IB comp.indd 1-6 7/29/08 2:15:37 PM7/29/08 2:15:37 PM
To Next Page
Need help?
General
