DEEP LEARNING PLUS USER MANUAL
46
HTTP
HTTP event actions can include snapshot images and transmit event information to network
software platforms.
To configure an HTTP Event Action, please follow the steps below:
1. From the <SETUP> tab, navigate to <DL SECURITY> - <EVENT ACTION> menu.
2. Select the <NETWORK> - <HTTP> tab.
3. Click the <ADD> button to create a new HTTP Event Action.
4. Configure the HTTP Event Action parameters as desired:
a. Name: Enter a custom HTTP Event Action preset name.
b. Protocol: Select whether to use HTTP or secure HTTPS protocol.
To Next Page
Loading...
