English
Conceptronic ALTHEA03B
Input : 12V ~ 24V
Output :
USB-A Output: DC 5V/2.4A, 9V/2A, 12V/1.5A (18W)
USB-C Output: DC 5V/2.4A, 9V/2A, 12V/1.5A (18W PD3.0)
Plug the USB car tablet charger in your car cigarette lighter
socket.
Start your car.
The USB car tablet charger will be powered by the cigarette
lighter socket. This will be indicated with the Power LED in the
USB car tablet charger.
Note: Some cars also provide power to the cigarette lighter
socket when the car is not started. This can drain your
car battery if the USB car tablet charger is left in the
cigarette lighter socket when your car is not used.
Connect your USB device(s) to the USB car tablet charger.
Your USB device(s) will now be charged.
Note: The Conceptronic USB car tablet charger is protected
with a fuse, to prevent damage to your car or your
connected USB device. When there is an overload on the
power, the fuse will break.
To Next Page
Loading...
