ENGLISH
30
1 Antenna Connector
This round ti a stand nnector where any antennas
with Reverse SMA c ctor ca ted to the Access Point.
Adapter Port
ck of the pow
3 LAN Port
The Access Point’s port is w .
The Reset button allows you to do one of two things:
1) If pro ems occ your with a pencil tip
(for less than 5 s itself, keeping your
original configurations.
st or you experience extreme problems or you forgot your
th the factory default settings).
connec on is ard Reverse SMA co
onne n be connec
2 DC
Insert the power ja er adapter into this port.
LAN here you connect your LAN’s network devices
4 Reset
bl ur with Access Point, press the reset button
econds) and the Access Point will re-boot
2) If problems persi
password, press the reset button for longer than 10 seconds and the Access
Point will reset itself to factory default settings (warning: your original
configuration will be replaced wi
2 3
1 4
To Next Page
Loading...
