ENGLISH
32
4 In the Network Component Type dialog box, select Protocol and click Add button.
nd TCP/IP and then click
your Windows CD
6 x. Select TCP/IP from the list
7
iguration: Select Disable DNS.
an IP Address. Specify the IP Address and Subnet Mask
as following example.
available,
4 Subnet Mask: 255.0.0.0
PC will now have the IP Address you specified.
1b) W
gs, then click Control Panel. The Control
Panel window will appear.
k and Dial-up Connections icon. In the Network and Dial-up
ocal Area
ction window, click the Properties button.
twork Components. You should see Internet Protocol [TCP/IP]
on your list. Select it and click the Properties button.
ddress and Subnet mask as following.
5 In the Select Network Protocol dialog box, select Microsoft a
the OK button to start installing the TCP/IP protocol. You may need
to complete the installation.
After installing TCP/IP, go back to the Network dialog bo
or Network Components and then click the Properties button.
Check each of the tabs and verify the following settings:
Bindings: Check Client for Microsoft Networks and File and printer sharing for
Microsoft Networks.
Gateway: All fields are blank.
DNS Conf
WINS Configuration: Select Disable WINS Resolution.
IP Address: Select Specify
3 IP Address: 10.0.0.3 (any IP address within 10.0.0.2~10.0.0.254 is
do not use 10.0.0.1)
8 Reboot the PC. Your
indows 2000
Click the Start button and select Settin1
2 Double-click Networ
Connection window, double-click Local Area Connection icon. The L
Connection window will appear.
3 In the Local Area Conne
4 Check your list of Ne
5 In the Internet Protocol (TCP/IP) Properties window, select Use the following IP
address and specify the IP A
• IP Address: 10.0.0.3 (any IP address within 10.0.0.2~10.0.0.254 is available,
do not use 10.0.0.1)
• Subnet Mask: 255.0.0.0
6 Click OK to confirm the setting. Your PC will now have the IP Address you
specified.
To Next Page
Loading...
