ENGLISH
43
3.2.2.8. Wireless Setting – Set Security
With “Set Security” you can setup wireless security between the bridged access points in “AP
Bridge-Point to Point mode”, “AP Bridge-Point to Multi-Point mode” or “AP Bridge-WDS
mode”. It provides “WEP 64bits”, “WEP 128bits”, “WPA (TKIP)” and “WPA2 (AES)” encryption
methods.
arameter Description P
Encryption You can select “No encryption”,“WEP 64bits”, “WEP 128bits”,
“WPA (TKIP)” or “WPA2 (AES)” encryption methods.
ou select “WEP 64bits” or “WEP
128bits” encryption method. You may choose to select ASCII
n the
ters : guest
Hexadecimal Digits : 12345abcde
WEP Key
ridged access points. Fill the text box by following the rules
-F”, “a-f”
yption
keys.
WEP Key format This is only used when y
Characters (alphanumeric format) or Hexadecimal Digits (i
“A-F”, “a-f” and “0-9” range) to be the WEP Key. For example:
ASCII Charac
The WEP key is used to encrypt data transmitted between the
b
below. 64-bit WEP: input 10-digit Hex values (in the “A
and “0-9” range) or 5-digit ASCII character as the encr
To Next Page
Loading...
