ENGLISH
46
802.11G Protection This is also called CTS Protection. It is recommended to enable the
mechanism can decrease the rate of
en
protection mechanism. This
data collision between 802.11b and 802.11g wireless stations. Wh
the protection mode is enabled, the throughput of the AP will be a
little
slower due to many of frame traffic should be transmitted.
Click the Apply button at the bottom of the screen to save the above
configurations.
3.2.4. Security
int provid WEP, IEEE
wi
sure your wireless station
This Access Po
8
es complete wireless LAN security functions, include
02.11x, IEEE 802.11x th WEP, WPA with pre-shared key and WPA with RADIUS. With
these security functions, you can prevent your wireless LAN from illegal access. Please make
s use the same security function.
Note: This access point can act as station and AP at the same time in “Universal Repeater
mode”. The secu ngs only apply to AP function in “Universal Repeater mode”. The
rsal Repeater mode” does not have a security feature.
rity setti
tation function of “Unive
s
To Next Page
Loading...
