English
Congratulations on the purchase of your Conceptronic EMRICK11B.
When problems occur, we advise you to visit our support site (go to
www.conceptronic.net and click on 'Support'). If you have other questions about your
product and cannot find it on our website, please contact us at
support@conceptronic.net.
For more information about Conceptronic products, please visit the Conceptronic
website: www.conceptronic.net.
Installation & usage
◼ Install EMRICK11B into a standard PC slot and connect it internally to a USB 3.0
19-pin header.
◼ You've successfully installed EMRICK11B, adding dual USB 3.0 ports for
enhanced connectivity. No driver installation is needed.
Safety & Warnings instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on proper
handling in this manual, we assume no liability for any resulting personal injury or
damage to property. Such cases will invalidate the warranty/guarantee.
◼ Keep the device away from water, humidity, fire or hot environments.
◼ Keep your device and all its parts and accessories out of the reach of small
children.
◼ Do not leave the packaging material lying around carelessly. This may become
dangerous playing material for children.
◼ Avoid dropping, throwing or crushing the device.
◼ Do not open, change or damage the device.
◼ Disconnect the product from the mains before cleaning.
◼ Clean the product with a dry, fibre-free cloth.
To Next Page
Loading...