Conceptronic JARETH03W - Page 7

b) Scan QR to Add
You will see your Wi-
Fi name, inputting the
correct Wi-Fi
password and tap
“Next”.
The app will show a
QR code, please put
the phone in front of camera (3-8 inches), then please tap
“Next” if you hear “QR code scanning is successful”.
Once it’s connected,
camera will say “Wi-Fi is
connected” and the blue
light will flash slowly.
When the blue light is
steady, the app will
switch to a page that you
can change camera
name.
You can view the video after successful adding camera.