Need help?Do you have a question about the Concertone DVD STEREO RADIO SYSTEM and is the answer not in the manual?
General| Type | DVD Stereo Radio System |
|---|---|
| Tuner | AM/FM |
| Zone Output | 2 Zone |
| Speakers | Included |
| USB Port | Yes |
| Remote Control | Yes |
| Display | LCD |
| Playable Media | DVD, CD |
Details the one-year limited warranty for the Concertone unit, covering defects in material or workmanship.
Alerts users to potential hazards including electrical shock, laser radiation, and fire/moisture risks.
Explains the unit's compatibility with DVD region codes and the implications of mismatched region numbers.
Describes common icons found on DVDs for audio language, subtitles, and camera angles.
Defines the organization of content on DVDs (titles, chapters) and CDs (tracks).
Provides instructions for correct remote operation, including placement and battery installation.
Offers guidelines for replacing remote control batteries, including precautions against leakage and mixing types.
Details buttons for power, navigation, playback, setup, and basic playback controls.
Explains buttons for display, angle, audio, and subtitle selections.
Covers buttons for opening disc tray, function selection, and radio tuning.
Details buttons for slow motion, stop, play, pause, and repeat playback.
Explains indicators for stereo, repeat modes, title, angle, memory, operation status, and Dolby Digital.
Shows how the screen displays change based on operation status like 'No Disc', 'Playing', or 'Paused'.
Describes the 'Invalid Region' message for incompatible disc region codes.
Instructions for turning on the system and selecting the correct video input channel.
Explains how to set the automatic turn-off timer for the unit.
Details how to adjust speaker balance for front, center, and rear channels for surround sound.
Explains how to adjust bass and treble to modify the sound quality.
Describes the audio technologies supported by the unit for enhanced movie and music playback.
Explains Pro Logic Emulation (EMU) and Matrix (MATRX) modes for surround sound processing.
Describes how to select speaker output status for different audio modes and disc types.
Provides a table showing speaker output configurations for various functions and disc types.
Instructions for loading a disc and initiating playback using the PLAY button.
Details how to pause, resume, and stop disc playback to interrupt or end a session.
Explains how to navigate to previous or next tracks on a disc using remote buttons.
Describes how to use fast forward and reverse playback at multiple speeds.
Explains how to engage slow-motion playback at different speeds.
Details how to skip forward or backward through disc content.
Describes how to zoom and pan on images during playback.
Explains how to switch between different camera angles recorded on a DVD.
Details how to choose different audio formats available on a disc.
Describes how to select desired subtitle languages programmed on a DVD.
Explains how to check and change current settings for angle, audio, and subtitle.
Details how to skip to specific titles and chapters using the GOTO function.
Describes how to jump to a specific playback time (hours, minutes, seconds) on a disc.
Instructions for finding and playing a specific title on a DVD by entering its title number.
How to navigate to a specific title, chapter, or track by entering its corresponding number.
How to jump to a specific playback time (HH:MM:SS) on discs using the GOTO function.
Details how to select desired angles and audio formats displayed on screen.
Explains how to select desired subtitle languages from the available options.
How to program a sequence of titles and chapters for custom playback.
How to program a sequence of tracks from an audio CD for custom playback.
How to repeatedly play a specific title or chapter on a DVD.
How to repeatedly play a single track or an entire CD/DVD.
How to set A-B repeat for a specific segment of playback.
Instructions for playing MP3 files from CD-R discs, including file naming and bit rate considerations.
Details how to pause, stop, and skip MP3 files during playback.
Explains how to navigate and select MP3 files on the screen using the remote.
Instructions for playing picture files from CD-R discs, including automatic display.
Covers thumbnail review, full-screen playback, and image manipulation like zoom and rotation.
How to play discs containing both MP3 and picture files.
How to tune into radio stations manually using the TUNING button.
Explains FM stereo mode and how to handle weak signals for better reception.
How to automatically scan for and tune to available radio stations.
Instructions for storing favorite radio stations into memory using the MEMORY button.
How to select and tune into stored radio stations using preset numbers.
How to add, delete, or auto-scan TV channels for CATV or broadcast reception.
Instructions for the unit to scan and store all receivable TV channels.
Details the process of adding or removing individual TV channels from the receiver.
Explains how to add or delete all receivable TV channels simultaneously.
How to select and view TV channels after the setup process is complete.
How to change the menu and display language of the unit.
How to adjust the picture aspect ratio (e.g., 4:3, 16:9) for different TV types.
How to select the video signal output type (CVBS, YUV, RGB).
How to adjust the picture brightness for optimal viewing.
How to adjust picture edges for sharpness or softness.
How to configure digital audio output settings like Raw or PCM.
Instructions on how to restore the unit to its original factory default settings.
How to set up parental controls, including security codes and lock levels.
Details the different rating levels for DVD parental controls and their equivalents.
Provides a comprehensive list of language codes used for DVD subtitles and audio tracks.
Instructions for cleaning discs to ensure proper playback and prevent skipping.
Guidance on cleaning the main unit using a soft cloth, avoiding volatile chemicals.
Key points for power cycling during issues and removing discs before transport.
Details frequency ranges for tuner and power output for amplifier section.
Covers frequency response, signal-to-noise ratio, dimensions, and weight.
Illustrates how to connect antennas, video sources, audio inputs, and speakers.
Provides instructions for connecting speakers correctly to avoid phasing issues and damage.
Details how to replace the unit's fuse with the correct amperage.
To Next Page
