Why shutter button does not work on my Concord Camera?
If the shutter button does not work, ensure the camera is turned on. Also, the camera may be processing a picture; wait until the ready LED light stops blinking before attempting to take another picture.
Why is my Concord Camera not responding during picture capture?
If the camera is not responding during picture capture, the battery level may be low. Replace the batteries.
Why won't my Concord Camera digital camera turn on?
Your Concord Camera digital camera might not turn on due to several reasons: the batteries may not be installed correctly—ensure they are installed following the markings inside the battery compartment or on the battery contact. The batteries could also be dead or weak, so try replacing them. Lastly, the battery door might not be closed properly; make sure it is securely closed.
Why is picture blurred when looking through the viewfinder of my Concord Camera?
If the picture is blurred when looking through the viewfinder, the viewfinder may be dirty. Clean it with a soft cloth or cotton swab.
What to do if Concord Camera cannot take a picture or a video clip when using an SD memory card?
If you cannot take a picture or video clip when using an SD memory card, the SD card may be locked or write-protected. Remove the SD card and slide the lock switch to the off position.
Why is there something wrong with the color of the photographs taken with Concord Camera?
If there is something wrong with the color of your photographs, the white balance may not be set properly. Reset the white balance feature to Auto, or for the specific lighting in the surrounding area.
What to do if flash picture taken with Concord Camera is too light?
If a flash picture is too light, the subject might be too close. Move the subject further away from the camera. Alternatively, the flash may not be needed, so change the camera setting to Auto Flash. If the lighting is too bright, decrease exposure compensation.
How to fix poor image quality on Concord Camera?
If your picture or video clip has poor image quality, it could be due to poor lighting. Increase the lighting in the surrounding area. If the lens is dirty, clean it with a soft cloth. Also, ensure the subject is not too close; stand at least 2 ft (0.6m) away in normal mode or 4 inches (10cm) away in Macro mode.
What to do if Concord Camera turns off during usage?
If your camera turns off during use, the batteries are likely drained. Replace them with new ones.
What to do if flash did not work on my Concord Camera?
If the flash didn't work, it could be that there was sufficient light, and the camera, when set to Auto Flash, determined the flash wasn't needed. This is normal. Ensure the flash is turned to Auto flash and verify that the Ready LED has stopped blinking before taking a picture.
General| Megapixels | 4 MP |
|---|---|
| Optical Zoom | 3x |
| Digital Zoom | 4x |
| Image Sensor Type | CCD |
| Battery Type | 2 x AA batteries |
| Type | Compact |
| Storage Media | SD Card |
| Video Resolution | 320 x 240 |
| Screen Size | 1.5 inches |
| ISO Range | Auto |
Explains LCD icons and lists main camera features.
Steps for inserting batteries.
How to power the camera on and off.
Resetting camera settings to factory defaults.
Formatting the memory card or internal memory.
How to transfer files to the PC.
Storage type and power source details.
To Next Page