EV COMPENSATION
The camera uses EV Compensation to give you well exposed pictures under most conditions. If the main
subject turned out too light or too dark, you can use the EV Compensation feature to improve the result.
Exposure Compensation Description
Mode
Increasing the Exposure in pictures that are too dark, will make the picture lighter.
Decreasing the Exposure in pictures that are too light will make the picture darker.
How to use Exposure Compensation:
1. Press in the Main Menu until ( ) EV Compensation is highlighted.
2. Press to display the EV Compensation bar on the LCD.
3. Press to change the EV Compensation between - 1.8 to +1.8.
4. Press the OK button to select the desired value
• The camera will return to picture taking mode automatically after selecting.
SCENE SELECTION
The default options in the camera can be used in most settings. The scene modes are helpful to quickly
optimize the various settings to best capture specific scenes.
Preset Scene Description
Off No Scene Selection (default).
Party/Indoor Use this mode in to capture the details of candlelit scenes or other indoor
background light conditions.
Beach/Snow
Use this mode to capture the details in high glare scenes such as snow or shining water.
Night Portrait Use this mode to capture a subject illuminated with the lights in a night scene with
a slow shutter speed.
-
Due to the slow shutter speed, place the camera on a tripod for better picture quality.
How to set the Scene Selection:
1. When Scene Selection is highlighted, press to enter its submenu.
2. In the Scene Selection menu, press to choose between the options.
3. Press the OK button to select the Scene mode.
4. Press the MENU button to return to picture taking mode.
Note: Any change of the flash setting will cancel the scene selected in Scene Selection.
+
-
To Next Page
Loading...
