CONCORD FUSION - Braking and Wheel Locking; Using the Brake; Locking the Front Wheels; Adjusting the Suspension

_ LOCKING THE FRONT wHEELS
To lock the front wheels of the CONCORD FUSION, twist the locking
button (09) into the horizontal position. The button snaps inwards and
locks the wheel in a forward-pointing position. To release the locking
device, pull out the locking button and twist it into the vertical position.
_ ADjUSTING THE SUSPENSION
There is a choice of two settings for the suspension of the rear wheels.
Twist the knob (19) into the horizontal position for a softer suspension or
into the vertical position for a firmer suspension.
41
_ USING THE bRAKE
To lock the brake of CONCORD FUSION, press down the brake lever
(18); press the brake lever upwards to release the brake.
40