• Secure the two diagonal belts
relevant to the seat you have chosen
in their respective belt buckle so that
the belts lie evenly and closed on
the back seat bench.
• Place the baby carrier on the back
seat bench.
• Open the belt adaptor (11) by
pushing the safety catch to the side.
• Pull the diagonal lap belts out until
you can feed them from the bottom
upwards into the belt adaptors.
• Close the side safety catches on the
adaptors again.
• The diagonal belts now run from
above through the closed vehicle
belt buckles, then through the
closed belt adaptors (from bottom
to top) into the bracket on the
vehicle.
To Next Page
Loading...
