16 17
Important
Quick date setting:
as for all mechanical watches equipped with a calendar, the quick date
setting (crown in position I) MUST NEVER be carried out between 9pm
and 3am.
Water-resistance:
once the time/date setting is finished, you must screw the crown back
again in order to guarantee perfect water-resistance. To do this, push the
crown in to position 0 and turn it in a clockwise direction.
It is recommended that the crown and pushers not be handled under
water.
Use of the chronograph
The measurement is carried out in
hours, minutes and seconds.
Push button A:
1st press: sets off the time
measurement.
2nd press: stops the time
measurement.
3rd press: restarts the time
measurement.
Push button B: single press, resets
the chronograph to zero (use when
the chronograph has stopped).
A
B
Intermediate or interval timing
Start: press push-button A to start running the chronograph.
Display interval time: press push-button B once. Timing continues in the
background.
Making up the measured time: press push-button B again.
Stop: press push-button A to stop the chronograph.
Back to zero: press push-button B (the chronograph counter will be reset
to its zero position).
0
I II
To Next Page
Loading...
