Conlux CCM5 series User Manual

Details the customer protection plan, warranty, and contact information for Conlux USA Corporation.

Identifies the CCM5 coin changer model.

Identifies the CCM5OD discriminator model.

Details the US-1 cassette tube assembly, including coin accommodation.

Lists the types of US and Canadian coins the changer accepts.

Details the coin capacity for each tube in the US-1 cassette.

Lists various functions like auto-fill, failure sensing, and payout modes.

Details the US-1 cassette tube assembly, coin filling, and status detection.

Explains how the coin tube full status is sensed using switches and software counters.

Explains how failures are detected and indicated via LEDs.

Explains how the changer adjusts change quantities independently.

Explains how change status is sensed and transmitted to the main controller.

Lists the maximum values for change data for different coin types.

Provides essential guidelines for handling and servicing the coin changer.

Identifies key components of the US-1 cassette and the coin changer.

Outlines the procedures for operating the coin changer.

Details the step-by-step process for installing the coin changer.

Provides instructions for loading coins into the change tubes.

Details the process for removing coins from the payout tubes.

Provides steps for performing a vend test to verify functionality.

Describes the main components of the discriminator section.

Identifies and illustrates the main parts of the coin changer unit.

Explains the coin flow path for the US-1 cassette.

Explains how coins are discriminated based on metal content and shape.

Details the operation of gate levers, anti-stringing hooks, and credit sensors.

Describes the mechanism for dispensing coins as change.

Shows terminal connections and signal assignments for the control board.

Instructions for safely preparing the discriminator for cleaning.

Detailed instructions for cleaning the discriminator and its parts.

Instructions for cleaning the coin base, payout slide, and payout link assembly.

Provides procedures for disassembling and assembling the main coin changer body.

Provides procedures for disassembling and assembling the cassette tube assembly.

Provides procedures for disassembling and assembling the discriminator.

Exploded view and parts list for the discriminator.

Exploded view and parts list for the main coin changer unit.

Exploded view and parts list for the gear case assembly.

Exploded view and parts list for the US-1 cassette tube assembly.

Exploded view and parts list for the US-4 cassette tube assembly.

Exploded view and parts list for the US-5 cassette tube assembly.

Exploded view and parts list for satellite tube assemblies.

Exploded view and parts list for the ST motor gear case assembly.