Need help?Do you have a question about the ConnectGear USB kvm switch and is the answer not in the manual?
General| Brand | ConnectGear |
|---|---|
| Model | USB kvm switch |
| Category | Switch |
| Language | English |
Hot key combination to switch between PC 1 through 4.
Hot key combination to switch to the next connected PC.
Hot key combination to switch to the previous connected PC.
Hot key to toggle the audible beep notification on or off.
Hot key to enable auto-scan mode, switching PCs every 10 seconds.
Defines the KVM switch as 2 PC to 1 User or 4 PC to 1 User.
Specifies the type and quantity of connectors for PC connections.
Specifies the type and quantity of connectors for console devices.
Indicates the maximum video resolution supported by the KVM switch.
Specifies the video signal bandwidth of the KVM switch.
Identifies the signal type used by the KVM switch, e.g., USB 1.1.
Defines the acceptable range of ambient temperature for operation.
Specifies the temperature range for safe storage of the device.
Indicates the humidity range for proper functioning and storage.
Describes the material used for the KVM switch enclosure.
Indicates the device is powered via the USB connection.
Confirms compliance with USB 1.1 specifications for 12Mbps data transfer.
Features hot keys and direct-access selectors for easy switching.
Includes an LED display for easy monitoring of device status.
No drivers or firmware required for Windows and Mac OS.
