connexx Smart Connect Quick Start Guide

Mul Funcon
Buon (MFB)
Volume
Down
Volume
Up
Blue LED
Green LED
Orange LED
Smart Connect Quick Start Guide
Neckloop
Before you begin:
• Charge Smart Connect for 2 hours with provided charger and cable
• Neckloop must be securely connected: no metal showing
• Hearing aids must be First Fit and programmed by hearing care
professional
• Hearing aids must have fresh baeries
• Hearing aids and Smart Connect should be in wearing posion or
the hearing aids may be on a at surface within 6 inches of the
neckloop
• If a cell phone will be used, it should be within reach
• Verify that the Smart Connect is o. If any LED blinks when
pressing any buon, press and hold the MFB for 2 to 5 seconds to
turn o.
Reset: single hole
near the base
Charging
Port
This is not a substuon for reading your Owner’s Manual. For more
In depth instrucons, please refer to your Owner’s Manual.

connexx Smart Connect Specifications

General

Brand	connexx
Model	Smart Connect
Category	Stereo System
Language	English