Conrad VC-300 - User Manual

Details compliance with DIN/VDE standards and essential safety rules for operation.

Warns about exposed voltage-carrying components when covers are removed.

Mandates qualified personnel for repairs and warns about capacitor voltage hazards.

Provides fuse replacement instructions and advises caution with high voltages.

Mandates using supplied leads and avoiding contact with test points.

Specifies ground voltage limits and conditions for suspending operation.

Specifies voltage limits for measuring cables and the VC-300 unit.

Advises caution with high voltages and warns about exceeding maximum input limits.

Warns against setting the rotary switch to voltage measurement during current measurement.

Details safety precautions, steps, and display indications for voltage measurements.

Emphasizes series connection for DC current and outlines safety warnings.

Specifies time limits and intervals for 20 A DC current measurements.

Outlines AC current safety warnings and limits for 20 A measurements.

Emphasizes safety and connection steps for resistance measurements.

Explains continuity check connection, beep sound, and safety precautions.

Emphasizes safety by ensuring circuits are de-energized and discharged for diode testing.

Warns about touching terminals at high voltage and changing range/function.

States the maximum input voltage and current limits for measurements.

Details input limits for resistance, diode, continuity, and frequency measurements.