Need help?Do you have a question about the Consilium Salwico CS4000 and is the answer not in the manual?
General| System Type | Addressable |
|---|---|
| Max Number of Loops | 8 |
| Display | LCD |
| Input Voltage | 230 VAC |
| Relative Humidity | 95% non-condensing |
| Type | Fire Alarm Control Panel |
| Number of Sounders per Loop | 126 |
| Battery Backup | 24 hours standby, 30 minutes alarm |
| Networking | Ethernet |
| Redundancy | Optional |
| Operating Temperature | 0°C to +40°C |
| Communication Protocols | Modbus |
| Certifications | EN54-2, EN54-4 |
| Power Supply | 24V DC, 3A max |
Procedures for testing individual fire-detecting zones and their components.
Step-by-step guide to simulate and verify system fault conditions.
Managing test modes and verifying control unit display functionality.
Methods for cleaning smoke, heat, and flame detectors.
Steps for replacing detectors and setting their unique ID addresses.
Managing loop unit configuration via Hot Plug&Play.
Adding/deleting loop units using the system's service menu.
Detailed steps for safely replacing the system's backup batteries.
Uploading and downloading configuration files to/from the system.
Guide for updating the software on the system's base board.
Viewing system configuration, board details, and status.
Managing system zones, loops, loop units, and panel displays.
Adding loop units, reloading configurations, and managing files.
Uploading system logs for diagnostics and technical support.
Comprehensive list of fault codes, their causes, and remedies.
Information on fuse types, ratings, and locations within the system.
Wiring diagrams for detectors and manual call points.
Wiring and configuration for address units and ID switches.
Details on the Panel Board's function, specifications, and DIP switch settings.
Diagram showing the physical layout of components on the Panel Board.
Overview of the Base Board's function and address switch configuration.
Diagram showing the physical layout of components on the Base Board.
Details on the Rectifier Board's function and address switch configuration.
Diagram showing the physical layout of components on the Rectifier Board.
Details on the BDP-1 kit's purpose, functions, and included components.
Overview of the Loop Board's function and address switch configuration.
Diagram showing the physical layout of components on the Loop Board.
Details on the Zone Board's function and address switch configuration.
Diagram showing the physical layout of components on the Zone Board.
Details on the Output Board's function and address switch configuration.
Diagram showing the physical layout of components on the Output Board.
Overview of the Ethernet Board's function, mounting, and data.
Details on the USB Expansion Board's ports, function, and connections.
Details on the MUX Board's function and address switch configuration.
Diagram showing the physical layout of components on the MUX Board.
To Next Page
