5. 20-amp IEC AC socket
Connect the supplied 20-amp AC cord here. You may also use an
aftermarket power cord if you wish, but it must have a 20-amp
connector.
6. RS-232 connector
This connector allows control of the Taurus from third-party
home automation systems. Consult your Constellation Audio
dealer for more information.
6. USB jack
This jack allows control of the Taurus from third-party home au-
tomation systems. Consult your Constellation Audio dealer for
more information.
8. Trigger input
This 3.5mm jack accepts a 12-volt DC on/off trigger signal from
preamps and third-party control systems. When a 12-volt DC trig-
ger signal is input to the jack, the Taurus will turn on. When the
trigger signal stops, the amplifier will turn off.
7
To Next Page
Loading...