Conti+ ultra - Electronic Functions

6 74.096.EU15
• electronic functions
function procedure
feedback
signal
information default
setting
range
via iqua-
Touch
setting
range
via PC
*
temporary off
«cleaning mode»
activate
1x
 app. 2 sec. till  1x
extended function mode is active
2 min. -
0-3600
sec.
2x
 a app. 0,5 sec.   pulsing during active function
temporary off
stop
1x
 app. 0,5 sec.  1x
manual stop
or automatic
 1x
automatic after preset time
continous run
activate
1x
 app. 2 sec. till  1x
extended function mode is active
2 min.
0,5-20 min.
(in 0,5 min.
steps)
0-3600
sec.
1x
 minimum 3 sec.
(max. 5 sec.)

water  ows after releasing
continous run
stop
1x
 app. 0,5 sec. 
manual stop
or automatic

automatic after preset time
follow up
time control
for normal operation
set / programm
1x
 app. 2 sec. till  1x
extended function mode is active
1 sec.
0-10
sec.
0-3600
sec.
1x
 app. 5 sec. till  1x
1x
 0 - 10 sec.
keep touched

water  ows during touching - releasing de nes
duration
after releasing
 1x
con rmation, ready for operation
time of waterfl ow of
continous on
and
purge duration of
line purge feature
set / programm
1x
 app. 2 sec. till  1x
extended function mode is active
2 min.
0,5-20
min.
(in 0,5 min.
steps)
0-3600
sec.
(separately
adjustable)
1x
 minimum 3 sec.
(max. 5 sec.)

touch max. 5 sec., water  ows after releasing
1x
 keep touched till  1x - 40x
1x
 =0,5 min. .... 40x  = 20,0 min.
releasing de nes duration
after releasing

check / con rmation of setting by repeating
number of
 (1x - 40x) according to setting
line purge feature
activate / deactivate
«automatic  ush on
set intervall of non
usage»
1x
 app. 2 sec. till  1x
extended function mode is active
1 sec.
off
12 h
24 h
off
1-5000 h
1x
 app. 25 sec. till  1x - 3x
 1x = off,  2x =12 h,  3x = 24 h
ignore  ashes after 5 sec. and 10 sec. - keep
touched till
 1x - 3x aftter app. 25 sec.,
releasing de nes interval
restart electronics
1x
 app. 2 sec. till  1x
extended function mode is active
- - manually
2x
 a app. 0,5 sec.   pulsing during active function
1x
 app. 5 sec. till  4x  1x/sec.
release and wait till
 +   1x/sec., keep out of sensor area
wait till
 1x
con rmation, ready for operation
sensor range
set / programm
1x
 app. 2 sec. till  1x
extended function mode is active
6 1-8 steps manually
2x
 a app. 0,5 sec.   pulsing
1x
 app. 15 sec. till  1x - 8x
 1x = min. ......  8x = max.
ignore  ashes
 4x after 5 sec., keep touched
till
 1x - 8x after app. 15 sec., releasing
de nes sensor range step
release and wait till
 +   1x/sec., keep out of sensor area
wait till
 1x
con rmation, ready for operation
security off
 permanent 
when  without movement only
auto - -
empty battery
   2x/sec. during dedecting hand / object
auto - -
signs and symbols
 - touch Touch  - hand/object within sensor area
 - water fl ows  - LED fl ashes GREEN
 - waterfl ow stops  - LED fl ashes RED
h - hours / min. - minutes / sec. - seconds
* With optional Service-Aadapter or wireless W-Combox and Service Monitor Software! Beside the mentioned functions the Service Monitor
Software offers additional possibilities for custom parameterization.
XXX
XXX
XXX
XXX
TOUCH
EN