Need help?Do you have a question about the Controll-A-Door P Diamond and is the answer not in the manual?
General| Brand | Controll-A-Door |
|---|---|
| Model | P Diamond |
| Category | Garage Door Opener |
| Language | English |
Important safety rules to prevent injury or damage during installation and operation.
Lists the default operational parameters and settings for the opener.
Details electrical, mechanical, and environmental specifications of the opener.
The main opener unit, including transmitters and accessories.
Includes a single-piece rail with a pre-tensioned chain for door movement.
Includes a single-piece rail with a pre-tensioned timing belt for door movement.
Features a knockdown rail with a pre-tensioned chain for door movement.
Features a knockdown rail with a pre-tensioned timing belt for door movement.
Detailed steps for assembling the knockdown C-rail unit, including tension adjustment.
Instructions for connecting the C-rail assembly to the opener's powerhead shaft.
Guidance on fixing the C-rail to the powerhead using provided brackets and screws.
Identifies sectional doors on tracks for installation guidance.
Identifies one-piece doors on tracks for installation guidance.
Identifies one-piece doors without tracks for installation guidance.
Locates and marks the wall bracket position based on door travel.
Instructions for securely mounting the wall bracket to the wall.
Connects the C-rail assembly to the mounted wall bracket.
Details methods for securely attaching the opener's powerhead to the ceiling.
Locates the centre point on the door and wall for mounting.
Positions the opener and C-rail against the door before final mounting.
Guides on mounting the C-rail and wall bracket for non-track doors.
Attaches the powerhead to ceiling supports using perforated angles.
Describes an alternative method for fastening the opener using roof bolts.
Instructions for attaching the door bracket to the garage door panels.
Connects the door bracket and opener trolley with bent and straight arms.
Configures the opener's fully open and closed positions for the door.
Procedure to delete existing limit settings and re-enter new positions.
Tests for door reversal on obstruction during open/close.
Guides on increasing, decreasing, or resetting force.
Pairs a transmitter button to control the garage door opener.
Assigns a transmitter button to control the courtesy light independently.
Configures a transmitter to disable opener radio response for security.
Assigns a transmitter button to control external devices via auxiliary output.
Sets a transmitter button to partially open the door for pet access.
Resets all stored transmitter codes back to factory defaults.
Guides on mounting the wired wall transmitter for convenient control.
Details wiring for accessories like infra-red beams and key switches.
For improving radio reception in areas with poor signal strength.
Enhances safety by stopping the door if the beam is broken.
Provides an alternative wired control for opening, stopping, or closing the door.
Step-by-step guide to install the optional battery backup system.
Procedures to verify the battery backup operates correctly during power outages.
Addresses issues like slow operation or no charge for the battery backup.
Guides on using the transmitter to open, close, or stop the garage door.
Instructions for safely removing and replacing the transmitter battery.
How to disengage the opener for manual door movement during power failure.
Explains the door's locking facility and operation during power outages.
Explains safety beam function and enabling the auto-close feature.
Covers courtesy light, auxiliary output, vacation, and pet modes.
Details monthly and yearly maintenance checks and servicing.
Explains the courtesy light flashing indicator for expired warranty.
Lists symptoms, causes, and remedies for opener problems.
Guidance on information needed when contacting a dealer for service.
Explains the SERVICE LED and beeper fault indicators for diagnosing issues.
Explains LED and beeper signals indicating opener states and conditions.
Lists opener buttons and their corresponding operational or programming functions.
Defines key terms like B&D, Purchaser, Opener, and Approved Distributor.
Outlines warranty periods for components and installation services.
Details what is not covered and limits B&D's liability for defects.
Covers relevant Acts and the governing law for warranty claims.
To Next Page