ControlOMatic MegaChlor User Manual

MegaChlor ManualMegaChlor Manual 1313
MegaChlor Operation (cont.)MegaChlor Operation (cont.)
BoostBoost Button & Power Level Times Button & Power Level Times
To start or stop a chlorine generation cycle, press the To start or stop a chlorine generation cycle, press the BoostBoost button. If the button. If the MegaChlorMegaChlor was in standby was in standby
mode, it will switch to producing chlorine, regardless of if the water has reached zero pointmode, it will switch to producing chlorine, regardless of if the water has reached zero point
(MegaChlor-CD only). If the (MegaChlor-CD only). If the MegaChlorMegaChlor was already producing chlorine, this cancels that cycle. was already producing chlorine, this cancels that cycle.
When pressing the button, the When pressing the button, the GreenGreen and and BlueBlue ( (Salt HighSalt High and and Salt OKSalt OK) lights will ash, acknowledging ) lights will ash, acknowledging
the button push.the button push.
Note: The MegaChlorMegaChlor cannot make chlorine faster; the BoostBoost button simply turns it on for a single cycle.
If your chlorine has dropped to 0 PPM (parts per million) from heavy usage, chlorine may need to be
added to help break past zero.
Note for MegaChlor-CD: If a chlorine cycle was started by pressing the If a chlorine cycle was started by pressing the BoostBoost button (as opposed to button (as opposed to
automatically turning on when the chlorine is low), the salt status lights may ash instead of being solid.automatically turning on when the chlorine is low), the salt status lights may ash instead of being solid.
Power Level
11
55
44
33
22
66
On Time
77
88
1010
99
30 min30 min
44 hr hr
33 hr hr
22 hr hr
1 hr1 hr
55 hr hr
66 hr hr
77 hr hr
99 hr hr
88 hr hr
Electrode Lifespan IndicatorElectrode Lifespan Indicator
This feature tracks the amount of time the This feature tracks the amount of time the MegaChlorMegaChlor electrode has been actively producing chlorine. electrode has been actively producing chlorine.
The typical lifespan of the electrode is 7000 hours of chlorine generation. To view the lifespan:The typical lifespan of the electrode is 7000 hours of chlorine generation. To view the lifespan:
1. Press the 1. Press the BoostBoost and and DownDown buttons at the same time. buttons at the same time.
a. The following lights will ash to indicate the percentage used:a. The following lights will ash to indicate the percentage used:
• • GreenGreen ( (Salt HighSalt High) = 100) = 100
• • Blue Blue ((Salt OKSalt OK) = 10) = 10
• • RedRed ( (Salt LowSalt Low) = 1) = 1
b. Examples:b. Examples:
• • 5 5 BlueBlue ashes means that 50% life has been used ashes means that 50% life has been used
• • 6 6 BlueBlue ashes and 2 ashes and 2 RedRed ashes means that 62% life has been used (38% life is left) ashes means that 62% life has been used (38% life is left)
2. When the electrode life has reached 90%, the 2. When the electrode life has reached 90%, the WhiteWhite light for standby mode will rapidly ash light for standby mode will rapidly ash
twice every ten seconds instead of just once. Depending on your water and salt sources,twice every ten seconds instead of just once. Depending on your water and salt sources,
power level, zero point, and overall care of the electrode, it may continue to work well, evenpower level, zero point, and overall care of the electrode, it may continue to work well, even
beyond the 100% point. So, our intention is that this reminder helps you look out for when your beyond the 100% point. So, our intention is that this reminder helps you look out for when your
electrode starts producing less chlorine and to order a replacement electrode ahead of time, to electrode starts producing less chlorine and to order a replacement electrode ahead of time, to
have it ready for when you need it.have it ready for when you need it.
To reset the indicator (i.e. after replacing the electrode), press all three buttons on the control box at the To reset the indicator (i.e. after replacing the electrode), press all three buttons on the control box at the
same time.same time.
WhiteWhite

ControlOMatic MegaChlor Specifications

General

Brand	ControlOMatic
Model	MegaChlor
Category	Water Filtration Systems
Language	English