Introduction
HDMI to HDMI Splitter 1 input : 8 output is a High Performance HDMI
Distribution Amplifier.
It allows one HDMI source to output to 8 HDMI displays simultaneously.
Features
1. Solid and durable metal housing with all connections labeled and lined
up on the back.
2. Built-in HDCP key-sets allows each output to work independently when
connecting to a HDMI display.
3. Splits a HDMI source to 8 outputs, all at 1080p, without signal loss.
4. Supports DVI source and DVI display by using HDMI to/from DVI
adapter cable.
5. Supports a wide range of PC and HDTV resolutions, from VGA to
UXGA and 480p to 1080p. Maximum resolution bandwidth-165MHz.
6. Can be cascaded to another HDMI to HDMI Splitter for more outputs.
7. Each of the buffered outputs can operate on a cable length of up to 15
meters @ 1600x1200, or 1080p.
8. Support multi-channel compressed & uncompressed HDMI audio.
9. Full HDCP compliant.
10.Enhance function for signal pre-emphasis.
11. Fast handshaking reduces pre-picture blackout time to 5 seconds.
Operating Functions
and Controls
Front Panel
1. Power Switch: Press the switch to power on the unit.
2. Power LED Indicator: The LED will illuminate when the unit is
operating.
3. Sync LED: The LED will illuminate when the HDMI source signal is
connected to the input and is detected by the unit.
To Next Page