How to do it correctly
minis user manual 135
► Inserting and removing racks
Hot surfaces
Risk of burns from high temperatures inside the oven and on the inside of the appliance door
You may get burnt if you touch any of the interior parts of the oven, the inside of the appliance door or
any parts that were inside the oven during cooking.
f Wear personal protection equipment as specified in safety regulations.
Removing racks
To remove a rack, follow the steps below:
Step Action Illustration
OES 6.06 mini and OES 6.10 mini
Swing the rack gently into the oven and slide it upwards (1).
1
OES 10.10 mini
Push the rack upwards.
2 Un-hook the rack (2).
Caution:
Take care not to bend the rails, otherwise shelf-grills, baking
trays and containers will no longer be held securely.
Fitting racks
To fit a rack, follow the steps in the reverse order. Make sure that the rack is secured properly.
More on this ...
How to do it correctly
Fitting the air guide panel to rack (mini 6.10 and mini 10.10)..........................................................136
To Next Page
Loading...
