18
The metering mode refers to the way in which a camera determines
exposure. Cameras generally allow the user to select between average,
center, spot or matrix metering modes. The dierent metering modes
allow the user to select the most appropriate one for use in a variety
of lighting conditions.
7. Sharpness: High / Middle / Low
Default setting is Middle.
Sharpness controls the quality of details captured in your video
footage or photos. When you change this setting, the IPS display
display immediately shows you the eect on your image.
8. ISO: Auto / 100 / 200 / 400 / 800 / 1600 / 3200 /6400
Default setting is Auto.
ISO determines the camera’s sensitivity to light, and creates a trade-
o between brightness and resulting image noise. Image noise refers
to the degree of graininess in the image.
In low light, higher ISO values result in brighter images, but with
greater image noise.
Lower values result in lower image noise, but darker images. When
you change this setting, the IPS display immediately shows you the
eect on your image.
9. Time Watermark: O/On
Default setting is On.
If you turn on Date Stamp, this camera adds date/time stamp to the
videos you record.
To Next Page
Loading...
