To Next PageTo Next PageHow to fix a COOK Medical Accessories MINC that will not turn on?
If your COOK Medical Accessories MINC won't turn on and the displays are not lit, check the power supply connection first. If that's not the issue, ensure the mains power is turned on. Also, verify that the device is not in standby mode by checking if the Standby Indicator is illuminated green. If it is, press the Standby touch-pad.
General| Product Name | MINC K-MINC-1000 |
|---|---|
| Category | Accessories |
| Manufacturer | COOK Medical |
| Sterility | Sterile |
| Single Use | Yes |
Details essential safety warnings including electric shock, user servicing, explosion hazards, and disposable usage.
Lists the items supplied with the MINC and instructs to check for completeness and damage.
Details the type of gas mixture, pressure, and flow rate required for the MINC's operation.
Provides instructions for preparing, filling, and installing the disposable humidification flask.
Introduces the Logger Software, its purpose, and key features for monitoring MINC operation.
Covers powering on the device, self-test sequence, and automatic purge for establishing the environment.
Details how to adjust and monitor the temperature set points for each incubation chamber.
Details how to activate, deactivate, and adjust the gas flow rate for the incubation chambers.
Describes various alarm conditions, their indicators, and external alarm connectivity.
Outlines the steps to perform before commencing the culturing procedure, including temperature and gas flow setup.
Explains how to place NUNC® and FALCON® culture dishes securely in the incubation chambers.
Detailed procedure for replacing the filter, gas lines, and humidification flask for optimal performance.
Outlines the required biannual tests for temperature, gas flow, and external alarm contacts.
Lists common error indicators and alarms with their likely sources and elimination steps.
